It appears sometimes that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you automatically tend to think that you will have an incident or that the fix will cost you an astronomical amount of money. So, what if you identify noise from the brake calipers on your Mazda 5? It is probably not anything major and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to write this content and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mazda 5, and give you the causes for them in order to help you fix the issue.
The different types of brake caliper noise on Mazda 5 and their causes
The function of the Mazda 5 brake calipers is to come pinch the brake discs of your Mazda 5 thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Discovering a noise from it must therefore be looked into right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Mazda 5
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Mazda 5, it is highly conceivable that it will be caused by brake pads at the end of their existence, indeed, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Mazda 5. If after checking this point, you’re still enduring a grinding noise on your Mazda 5, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake from my Mazda 5 brake calipers
If you are the victim of a constant noise in the brake calipers of your Mazda 5 that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam after some time, especially if they are not employed enough. In such a case, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mazda 5
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Mazda 5, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be swapped at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your auto mechanic.
When I brake, I experience a squealing in my brake calipers of my Mazda 5
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mazda 5, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
