It appears sometimes that your car makes noises in the brake calipers, you are certainly not reassured by this types of noise and you automatically tend to think that you will have an incident or that the fix will cost you an astronomical sum. So, what if you detect noise from the brake calipers on your Mazda 2? It is probably not some thing severe and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have chosen to create this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mazda 2, and give you the reasons for them in order to help you resolve the problem.
The different types of brake caliper noise on Mazda 2 and their causes
The objective of the Mazda 2 brake calipers is to come pinch the brake discs of your Mazda 2 thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Experiencing a noise from it must therefore be looked into promptly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Mazda 2
If you hear a grinding or scrap metal noise coming from the brake calipers of your Mazda 2, it is highly imaginable that it will be related to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Mazda 2. If after verifying this point, you’re still enduring a grinding noise on your Mazda 2, have a look at this article to find a solution.
I experience a constant noise that stops when I brake from my Mazda 2 brake calipers
If you are the victim of a regular noise in the brake calipers of your Mazda 2 that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam after some time, specifically if they are not employed enough. In such a case, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mazda 2
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Mazda 2, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be replaced at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Mazda 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mazda 2, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
