It appears in some cases that your automobile makes noises in the brake calipers, you are rarely reassured by this kind of noise and you automatically tend to think that you will have an incident or that the fix will cost you an substantial sum. So, what if you identify noise from the brake calipers on your Jeep Compass? It may not be some thing serious and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have made the decision to write this content and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Jeep Compass, and give you the causes for them in order to help you fix the issue.
The different types of brake caliper noise on Jeep Compass and their causes
The objective of the Jeep Compass brake calipers is to come pinch the brake discs of your Jeep Compass thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Hearing a noise from it must therefore be examined immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Jeep Compass
If you notice a grinding or scrap metal noise coming from the brake calipers of your Jeep Compass, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Jeep Compass. If after checking out this point, you’re still going through a grinding noise on your Jeep Compass, have a look at this article to find a solution.
I encounter a uninterrupted noise that stops when I brake from my Jeep Compass brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Jeep Compass that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam as time passes, specifically if they are not used enough. When this happens, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Jeep Compass
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Jeep Compass, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be changed at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Jeep Compass
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Jeep Compass, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
