It occurs sometimes that your automobile makes noises in the brake calipers, you are almost never reassured by this kind of noise and you instantly tend to think that you will have an accident or that the repair will cost you an astronomical amount of money. So, what if you discover noise from the brake calipers on your Hyundai Sonata? It most likely is not anything severe and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have decided to write this content and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Hyundai Sonata, and give you the causes for them in order to help you fix the trouble.
The different types of brake caliper noise on Hyundai Sonata and their causes
The objective of the Hyundai Sonata brake calipers is to come pinch the brake discs of your Hyundai Sonata thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Hearing a noise from it must therefore be examined promptly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Hyundai Sonata
If you notice a grinding or scrap metal noise coming from the brake calipers of your Hyundai Sonata, it is highly possible that it will be related to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Hyundai Sonata. If after looking at this point, you’re still feeling a grinding noise on your Hyundai Sonata, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake from my Hyundai Sonata brake calipers
If you are the victim of a continual noise in the brake calipers of your Hyundai Sonata that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam with time, especially if they are not used enough. When this happens, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Hyundai Sonata
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Hyundai Sonata, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your auto technician.
When I brake, I encounter a squealing in my brake calipers of my Hyundai Sonata
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Hyundai Sonata, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
