It occurs occasionally that your car makes noises in the brake calipers, you are almost never reassured by this sort of noise and you instantly tend to think that you will have an incident or that the repair will cost you an astronomical amount. So, what if you find noise from the brake calipers on your Hyundai Elantra? It most likely is not anything serious and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have decided to compose this article and give you the chance to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Hyundai Elantra, and give you the explanations for them in order to help you resolve the problem.
The different types of brake caliper noise on Hyundai Elantra and their causes
The objective of the Hyundai Elantra brake calipers is to come pinch the brake discs of your Hyundai Elantra thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a sound from it must therefore be analyzed right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Hyundai Elantra
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Hyundai Elantra, it is highly conceivable that it will be caused by brake pads at the end of their existence, actually, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Hyundai Elantra. If after verifying this point, you’re still feeling a grinding noise on your Hyundai Elantra, have a look at this article to find a solution.
I encounter a uninterrupted noise that stops when I brake from my Hyundai Elantra brake calipers
If you are the victim of a constant noise in the brake calipers of your Hyundai Elantra that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam over time, specifically if they are not used enough. When this happens, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Hyundai Elantra
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Hyundai Elantra, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Hyundai Elantra
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Hyundai Elantra, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
