It appears occasionally that your car makes noises in the brake calipers, you are rarely reassured by this types of noise and you immediately tend to think that you will have an incident or that the fix will cost you an astronomical amount of money. So, what if you identify noise from the brake calipers on your Hyundai Bayon? It might not be anything severe and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have decided to create this document and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Hyundai Bayon, and give you the causes for them in order to help you solve the problem.
The different types of brake caliper noise on Hyundai Bayon and their causes
The function of the Hyundai Bayon brake calipers is to come pinch the brake discs of your Hyundai Bayon thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a sound from it must therefore be looked into quickly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Hyundai Bayon
If you notice a grinding or scrap metal noise coming from the brake calipers of your Hyundai Bayon, it is highly possible that it will be linked to brake pads at the end of their existence, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Hyundai Bayon. If after examining this point, you’re still encountering a grinding noise on your Hyundai Bayon, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake from my Hyundai Bayon brake calipers
If you are the victim of a continuous noise in the brake calipers of your Hyundai Bayon that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam as time passes, especially if they are not employed enough. In this case, they will tend to remain in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Hyundai Bayon
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Hyundai Bayon, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Hyundai Bayon
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Hyundai Bayon, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
