It happens sometimes that your automobile makes noises in the brake calipers, you are almost never reassured by this types of noise and you automatically tend to think that you will have an incident or that the fix will cost you an substantial amount of money. So, what if you discover noise from the brake calipers on your Honda Fit? It is probably not some thing serious and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have chosen to compose this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Honda Fit, and give you the reasons for them in order to help you fix the problem.
The different types of brake caliper noise on Honda Fit and their causes
The objective of the Honda Fit brake calipers is to come pinch the brake discs of your Honda Fit thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Discovering a sound from it must therefore be looked into immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Honda Fit
If you hear a grinding or scrap metal noise coming from the brake calipers of your Honda Fit, it is highly possible that it will be connected to brake pads at the end of their existence, in fact, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Honda Fit. If after checking out this point, you’re still feeling a grinding noise on your Honda Fit, have a look at this article to find a solution.
I encounter a continuing noise that stops when I brake from my Honda Fit brake calipers
If you are the victim of a continuous noise in the brake calipers of your Honda Fit that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam as time passes, specifically if they are not used enough. In this case, they will tend to remain in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Honda Fit
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Honda Fit, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Honda Fit
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Honda Fit, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
