It appears occasionally that your car makes noises in the brake calipers, you are rarely reassured by this sort of noise and you immediately tend to think that you will have an incident or that the fix will cost you an astronomical amount. So, what if you find noise from the brake calipers on your Ford Tourneo? It may not be some thing serious and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have decided to compose this content and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Ford Tourneo, and give you the explanations for them in order to help you fix the issue.
The different types of brake caliper noise on Ford Tourneo and their causes
The objective of the Ford Tourneo brake calipers is to come pinch the brake discs of your Ford Tourneo thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Hearing a noise from it must therefore be investigated right away and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Ford Tourneo
If you notice a grinding or scrap metal noise coming from the brake calipers of your Ford Tourneo, it is highly possible that it will be related to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Ford Tourneo. If after verifying this point, you’re still going through a grinding noise on your Ford Tourneo, have a look at this article to find a solution.
I experience a uninterrupted noise that stops when I brake from my Ford Tourneo brake calipers
If you are the victim of a regular noise in the brake calipers of your Ford Tourneo that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam as time passes, especially if they are not employed enough. In this case, they will tend to keep on being in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford Tourneo
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Ford Tourneo, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Ford Tourneo
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Ford Tourneo, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
