It occurs in some cases that your automobile makes noises in the brake calipers, you are rarely reassured by this kind of noise and you automatically tend to think that you will have an incident or that the fix will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Ford Taurus? It is probably not anything severe and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have decided to compose this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Ford Taurus, and give you the reasons for them in order to help you solve the trouble.
The different types of brake caliper noise on Ford Taurus and their causes
The objective of the Ford Taurus brake calipers is to come pinch the brake discs of your Ford Taurus thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a sound from it must therefore be investigated immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Ford Taurus
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Ford Taurus, it is highly conceivable that it will be linked to brake pads at the end of their existence, indeed, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be changed quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Ford Taurus. If after checking out this point, you’re still enduring a grinding noise on your Ford Taurus, have a look at this article to find a solution.
I feel a uninterrupted noise that stops when I brake from my Ford Taurus brake calipers
If you are the victim of a continual noise in the brake calipers of your Ford Taurus that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. In fact, they can jam after some time, specifically if they are not employed enough. When this happens, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford Taurus
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Ford Taurus, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be swapped at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your technician.
When I brake, I feel a squealing in my brake calipers of my Ford Taurus
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Ford Taurus, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
