It occurs sometimes that your automobile makes noises in the brake calipers, you are almost never reassured by this sorts of noise and you immediately tend to think that you will have an incident or that the repair will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Ford Kuga? It is probably not anything major and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have chosen to create this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ford Kuga, and give you the explanations for them in order to help you fix the problem.
The different types of brake caliper noise on Ford Kuga and their causes
The function of the Ford Kuga brake calipers is to come pinch the brake discs of your Ford Kuga thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Experiencing a noise from it must therefore be examined immediately and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Ford Kuga
If you hear a grinding or scrap metal noise coming from the brake calipers of your Ford Kuga, it is highly imaginable that it will be caused by brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Ford Kuga. If after examining this point, you’re still going through a grinding noise on your Ford Kuga, have a look at this article to find a solution.
I experience a uninterrupted noise that stops when I brake from my Ford Kuga brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Ford Kuga that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam over time, especially if they are not used enough. In this case, they will tend to keep on being in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford Kuga
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Ford Kuga, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your auto technician.
When I brake, I experience a squealing in my brake calipers of my Ford Kuga
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Ford Kuga, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
