It happens occasionally that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you automatically tend to think that you will have an incident or that the fix will cost you an astronomical amount of money. So, what if you discover noise from the brake calipers on your Fiat Panda 3? It may not be anything major and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have decided to create this document and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Fiat Panda 3, and give you the causes for them in order to help you fix the problem.
The different types of brake caliper noise on Fiat Panda 3 and their causes
The objective of the Fiat Panda 3 brake calipers is to come pinch the brake discs of your Fiat Panda 3 thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Hearing a noise from it must therefore be investigated quickly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Fiat Panda 3
If you notice a grinding or scrap metal noise coming from the brake calipers of your Fiat Panda 3, it is highly possible that it will be caused by brake pads at the end of their existence, in fact, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Fiat Panda 3. If after verifying this point, you’re still feeling a grinding noise on your Fiat Panda 3, have a look at this article to find a solution.
I feel a continuing noise that stops when I brake from my Fiat Panda 3 brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Fiat Panda 3 that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam over time, especially if they are not used enough. In such a case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Panda 3
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Fiat Panda 3, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your auto technician.
When I brake, I feel a squealing in my brake calipers of my Fiat Panda 3
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Fiat Panda 3, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
