It occurs occasionally that your car makes noises in the brake calipers, you are almost never reassured by this types of noise and you automatically tend to think that you will have an incident or that the fix will cost you an substantial sum. So, what if you identify noise from the brake calipers on your Dodge Durango? It may not be anything serious and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to create this document and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Dodge Durango, and give you the reasons for them in order to help you resolve the issue.
The different types of brake caliper noise on Dodge Durango and their causes
The objective of the Dodge Durango brake calipers is to come pinch the brake discs of your Dodge Durango thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Finding out a noise from it must therefore be looked into right away and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Dodge Durango
If you hear a grinding or scrap metal noise coming from the brake calipers of your Dodge Durango, it is highly conceivable that it will be linked to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Dodge Durango. If after examining this point, you’re still encountering a grinding noise on your Dodge Durango, have a look at this article to find a solution.
I experience a regular noise that stops when I brake from my Dodge Durango brake calipers
If you are the victim of a regular noise in the brake calipers of your Dodge Durango that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam after some time, specifically if they are not used enough. In such a case, they will tend to keep on being in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Dodge Durango
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Dodge Durango, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your auto mechanic.
When I brake, I experience a squealing in my brake calipers of my Dodge Durango
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Dodge Durango, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
