It happens occasionally that your car makes noises in the brake calipers, you are almost never reassured by this types of noise and you immediately tend to think that you will have an accident or that the repair will cost you an substantial amount of money. So, what if you find noise from the brake calipers on your Citroen Jumper 2? It might not be anything severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have decided to write this document and give you the chance to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Citroen Jumper 2, and give you the reasons for them in order to help you solve the trouble.
The different types of brake caliper noise on Citroen Jumper 2 and their causes
The function of the Citroen Jumper 2 brake calipers is to come pinch the brake discs of your Citroen Jumper 2 thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Hearing a noise from it must therefore be examined quickly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Citroen Jumper 2
If you find out a grinding or scrap metal noise coming from the brake calipers of your Citroen Jumper 2, it is highly imaginable that it will be connected to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be changed quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Citroen Jumper 2. If after checking this point, you’re still encountering a grinding noise on your Citroen Jumper 2, have a look at this article to find a solution.
I feel a constant noise that stops when I brake from my Citroen Jumper 2 brake calipers
If you are the victim of a continuous noise in the brake calipers of your Citroen Jumper 2 that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam with time, especially if they are not used enough. In this case, they will tend to stay on in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Citroen Jumper 2
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Citroen Jumper 2, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I feel a squealing in my brake calipers of my Citroen Jumper 2
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Citroen Jumper 2, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
