It appears in some cases that your car makes noises in the brake calipers, you are rarely reassured by this sort of noise and you automatically tend to think that you will have an accident or that the fix will cost you an substantial amount of money. So, what if you discover noise from the brake calipers on your Chevrolet Traverse? It is probably not anything severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have decided to write this document and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Chevrolet Traverse, and give you the causes for them in order to help you resolve the trouble.
The different types of brake caliper noise on Chevrolet Traverse and their causes
The function of the Chevrolet Traverse brake calipers is to come pinch the brake discs of your Chevrolet Traverse thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Discovering a noise from it must therefore be investigated right away and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Chevrolet Traverse
If you hear a grinding or scrap metal noise coming from the brake calipers of your Chevrolet Traverse, it is highly conceivable that it will be connected to brake pads at the end of their existence, indeed, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Chevrolet Traverse. If after looking at this point, you’re still encountering a grinding noise on your Chevrolet Traverse, have a look at this article to find a solution.
I encounter a frequent noise that stops when I brake from my Chevrolet Traverse brake calipers
If you are the victim of a continuous noise in the brake calipers of your Chevrolet Traverse that only stops when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam after some time, especially if they are not employed enough. In this case, they will tend to remain in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Chevrolet Traverse
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Chevrolet Traverse, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I encounter a squealing in my brake calipers of my Chevrolet Traverse
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Chevrolet Traverse, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
