It happens occasionally that your car makes noises in the brake calipers, you are certainly not reassured by this types of noise and you immediately tend to think that you will have an incident or that the repair will cost you an substantial sum. So, what if you discover noise from the brake calipers on your Audi Rs6? It might not be some thing major and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have chosen to compose this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Audi Rs6, and give you the reasons for them in order to help you solve the issue.
The different types of brake caliper noise on Audi Rs6 and their causes
The objective of the Audi Rs6 brake calipers is to come pinch the brake discs of your Audi Rs6 thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a sound from it must therefore be examined immediately and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Audi Rs6
If you notice a grinding or scrap metal noise coming from the brake calipers of your Audi Rs6, it is highly possible that it will be linked to brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be changed quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Audi Rs6. If after checking out this point, you’re still going through a grinding noise on your Audi Rs6, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Audi Rs6 brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Audi Rs6 that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam as time passes, specifically if they are not employed enough. When this happens, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Audi Rs6
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Audi Rs6, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be swapped at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Audi Rs6
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Audi Rs6, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
