It occurs in some cases that your car makes noises in the brake calipers, you are rarely reassured by this types of noise and you instantly tend to think that you will have an incident or that the fix will cost you an substantial amount. So, what if you find noise from the brake calipers on your Audi Q3? It may not be anything major and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have chosen to write this article and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Audi Q3, and give you the causes for them in order to help you resolve the trouble.
The different types of brake caliper noise on Audi Q3 and their causes
The objective of the Audi Q3 brake calipers is to come pinch the brake discs of your Audi Q3 thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Hearing a noise from it must therefore be analyzed promptly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Audi Q3
If you find out a grinding or scrap metal noise coming from the brake calipers of your Audi Q3, it is highly possible that it will be linked to brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Audi Q3. If after examining this point, you’re still experiencing a grinding noise on your Audi Q3, have a look at this article to find a solution.
I feel a continuous noise that stops when I brake from my Audi Q3 brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Audi Q3 that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam after some time, especially if they are not used enough. In this case, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Audi Q3
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Audi Q3, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your technician.
When I brake, I feel a squealing in my brake calipers of my Audi Q3
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Audi Q3, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
