It happens occasionally that your automobile makes noises in the brake calipers, you are almost never reassured by this types of noise and you instantly tend to think that you will have an incident or that the fix will cost you an astronomical sum. So, what if you identify noise from the brake calipers on your Acura RDX? It is probably not some thing serious and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to create this content and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Acura RDX, and give you the reasons for them in order to help you resolve the trouble.
The different types of brake caliper noise on Acura RDX and their causes
The objective of the Acura RDX brake calipers is to come pinch the brake discs of your Acura RDX thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Experiencing a noise from it must therefore be examined immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Acura RDX
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Acura RDX, it is highly imaginable that it will be connected to brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Acura RDX. If after examining this point, you’re still having a grinding noise on your Acura RDX, have a look at this article to find a solution.
I encounter a uninterrupted noise that stops when I brake from my Acura RDX brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Acura RDX that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam after some time, specifically if they are not used enough. In such a case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Acura RDX
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Acura RDX, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your auto technician.
When I brake, I encounter a squealing in my brake calipers of my Acura RDX
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Acura RDX, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
