In some cases your automobile can generate sounds in the front right, you are very hardly ever reassured by this kind of noise and you right away start to think that you will loose a wheel or that the repair will cost you an massive sum. Thus, what if you detect a noise coming from the front right of your BMW X1? It may not be much and you can fix the problem yourself, but if in doubt it is better to check before a larger damage occurs. It is with this in mind that we have decided to produce this content and allow you to locate the problem and find a solution. We will, through some steps review all the components that can create noises at the front right of your BMW X1. front-right-noise-bmw-x1

What are the components that can create front right noise BMW X1?

Most of our job will concentrate on finding the component that gives your BMW X1 front wheel noise. The following is a list of the elements that are most likely to be making it and how to verify it.

Grinding noise front right wheel BMW X1 : the shock absorber cup

One of the most likely causes of symptoms on your BMW X1 front right wheel noise is advanced wear and tear on your shock device. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its function and during small jolts that compress the suspension systems. To check if this is the problem that concerns you, take a dented, slow-speed road and focus on the noise coming from your front right as you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other parts and necessitate more costly repairs.

Noise while turning front right BMW X1 : stabilizer bar

If you know a noise when turning on your front right wheel BMW X1 at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the elements of your stabilizer bar that is defective. To verify the source of the problem, you may encounter a lack of balance in the direction of the automobile (it pulls to the right or it pulls to the right). In addition, you can put yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.

Front right noise when turning BMW X1 : direction triangles

Finally, you may have a noise in the front right wheel on your BMW X1, when you are accelerating, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.

Loud knocking or grinding noise front right BMW X1 : bearings

One of the other possible causes of symptoms of the front right grinding or knocking noise on your BMW X1, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So be sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them as soon as possible. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noises on BMW X1, you will surely find an answer to your problem.

Front right wheel noise squeaking BMW X1 : cardan shaft

One of the most traditional causes when noise happens on the front right of your BMW X1 when you turn with your automobile is linked to the direction of your automobile. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on BMW X1, do not hesitate to consult this article to find the solution to your problem.