On occasion your car can generate noises in the front right, you are very rarely reassured by this kind of noise and you immediately begin to think that you will loose a wheel or that the repair will cost you an massive amount. So, what if you recognize a noise coming from the front right of your Audi R8? It may not be much and you can fix the problem yourself, but if in doubt it is better to examine before a larger failure takes place. It is with this in mind that we have chosen to make this article and allow you to locate the problem and find a treatment. We will, through some steps review all the components that can produce noises at the front right of your Audi R8. front-right-noise-audi-r8

What are the elements that can provoke front right noise Audi R8?

Most of our article will concentrate on finding the element that gives your Audi R8 front wheel noise. The following is a list of the parts that are most likely to be generating it and how to verify it.

Grinding noise front right wheel Audi R8 : the shock absorber cup

One of the most classic causes of symptoms on your Audi R8 front right wheel noise is advanced wear and tear on your shock device. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer fulfils its job and during small jolts that compress the suspensions. To examine if this is the problem that worries you, take a dented, slow-speed road and focus on the noise coming from your front right as you pass over holes. If these are the cups, think about changing them soon as this may damage other components and require more expensive repairs.

Noise while turning front right Audi R8 : stabilizer bar

If you find out a noise when turning on your front right wheel Audi R8 at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the composents of your stabilizer bar that is malfunctioning. To verify the origin of the problem, you may experience a lack of balance in the direction of the automobile (it pulls to the right or it pulls to the right). Moreover, you can position yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.

Front right noise when turning Audi R8 : direction triangles

Finally, you may have a noise in the front right wheel on your Audi R8, when you accelerate, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also examine the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your technician.

Loud knocking or grinding noise front right Audi R8 : bearings

One of the other likely origins of symptoms of the front right grinding or knocking noise on your Audi R8, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them soon. If, on the other hand, this noise only happens with an engaged speed, read our article on loud noises on Audi R8, you will certainly find a response to your problem.

Front right wheel noise squeaking Audi R8 : cardan shaft

One of the most traditional causes when noise happens on the front right of your Audi R8 when you turn with your automobile is related to the direction of your automobile. Indeed, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Audi R8, do not hesitate to consult this article to find the solution to your problem.