It is never enjoyable to find out a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you notice a reversing gear noise that continues on your Land Rover Evoque? Any gearbox trouble can be severe, but before making sure, it is better to do a few investigations. Our team has made this paper to help you resolve it. First, we will see what the sources and the different gearbox noises can be on Land Rover Evoque, and second, what are the solutions available to you.
Classical reverse Land Rover Evoque noises and some tips to protect your gearbox
Why does the reversing of my Land Rover Evoque make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound generated by the reversing of your Land Rover Evoque is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will put in on the gears will be significant and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you find out a reverse noise on your Land Rover Evoque if you shift gear under these conditions.
Different Land Rover Evoque reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this document, to find out about the source of reversing noise on Land Rover Evoque. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Land Rover Evoque, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check out this paper for more info about strut mount noises on Land Rover Evoque.
An increased reverse knocking noise on Land Rover EvoqueX
If you are subject to a knocking noise when you are in reverse with your Land Rover Evoque and this noise tends to amplify as you gain speed. It is conceivable that you are experiencing a serious trouble that needs to be resolved rather quickly before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your auto technician quickly or read this document about gearbox noise on Land Rover Evoque for more data.
I acknowledge a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Land Rover Evoque reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
