It is never enjoyable to listen to a sound on your car that you don’t know where it comes from. You may be thinking what to do when you notice a reversing gear noise that persists on your Honda Insight? Any gearbox trouble can be critical, but before making sure, it is better to do a few inspections. Our team has made this article to support you eliminate it. First, we will see what the sources and the different gearbox noises can be on Honda Insight, and second, what are the solutions available to you.
Classical reverse Honda Insight noises and some tips to preserve your gearbox
Why does the reversing of my Honda Insight make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound caused by the reversing of your Honda Insight is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will apply on the gears will be significant and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you perceive a reverse noise on your Honda Insight if you shift gear under these conditions.
Different Honda Insight reversing noises and their origins
Finally in this section, we will move on to what you are probably most curious about in this page, to find out about the cause of reversing noise on Honda Insight. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you listen to a grinding noise when you start in reverse with your Honda Insight, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this article for more information about strut mount noises on Honda Insight.
An increased reverse knocking noise on Honda InsightX
If you are subject to a knocking noise when you are in reverse with your Honda Insight and this noise tends to build up as you gain speed. It is possible that you are dealing with a serious trouble that needs to be fixed right away before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your car to your mechanic quickly or browse this content page about gearbox noise on Honda Insight for more details.
I discover a noise when I go in reverse
Listening a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Honda Insight reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
