It is never pleasant to notice a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that remains on your Volkswagen Rabbit? Any gearbox issue can be important, but before making sure, it is better to do a few checks. Our team has written this document to support you fix it. First, we will see what the origins and the different gearbox noises can be on Volkswagen Rabbit, and second, what are the solutions available to you.
Classical reverse Volkswagen Rabbit noises and some tips to look after your gearbox
Why does the reversing of my Volkswagen Rabbit make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound made by the reversing of your Volkswagen Rabbit is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be significant and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you hear a reverse noise on your Volkswagen Rabbit if you shift gear under these conditions.
Different Volkswagen Rabbit reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this document, to learn about the cause of reversing noise on Volkswagen Rabbit. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Volkswagen Rabbit, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to read this article for more information about strut mount noises on Volkswagen Rabbit.
An increased reverse knocking noise on Volkswagen RabbitX
If you are subject to a knocking noise when you are in reverse with your Volkswagen Rabbit and this noise tends to build up as you gain speed. It is possible that you are dealing with a serious issue that needs to be solved as soon as possible before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your car to your technician quickly or browse this document about gearbox noise on Volkswagen Rabbit for more data.
I find out a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Rabbit reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
