It is never pleasant to perceive a sound on your vehicle that you don’t know where it comes from. You may be questioning what to do when you notice a reversing gear noise that continues on your Hyundai Santa Fe? Any gearbox trouble can be serious, but before making sure, it is better to do a few inspections. Our team has written this document to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Hyundai Santa Fe, and second, what are the solutions available to you.
Classical reverse Hyundai Santa Fe noises and some tips to maintain your gearbox
Why does the reversing of my Hyundai Santa Fe make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The sound induced by the reversing of your Hyundai Santa Fe is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will put in on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you perceive a reverse noise on your Hyundai Santa Fe if you shift gear under these conditions.
Different Hyundai Santa Fe reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to find out about the origin of reversing noise on Hyundai Santa Fe. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Hyundai Santa Fe, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to browse this content for more details about strut mount noises on Hyundai Santa Fe.
An increased reverse knocking noise on Hyundai Santa FeX
If you are subject to a knocking noise when you are in reverse with your Hyundai Santa Fe and this noise tends to amplify as you gain speed. It is conceivable that you are dealing with a serious trouble that needs to be fixed very fast before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your vehicle to your mechanic quickly or read this content page about gearbox noise on Hyundai Santa Fe for more data.
I find out a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Santa Fe reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
