It is never enjoyable to acknowledge a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that remains on your Chrysler Town & Country? Any gearbox issue can be serious, but before making sure, it is better to do a few investigations. Our team has written this content page to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Chrysler Town & Country, and second, what are the solutions available to you.
Classical reverse Chrysler Town & Country noises and some tips to maintain your gearbox
Why does the reversing of my Chrysler Town & Country make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The sound made by the reversing of your Chrysler Town & Country is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will apply on the gears will be enormous and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you notice a reverse noise on your Chrysler Town & Country if you shift gear under these conditions.
Diverse Chrysler Town & Country reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this page, to find out about the origin of reversing noise on Chrysler Town & Country. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Chrysler Town & Country, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this article for more details about strut mount noises on Chrysler Town & Country.
An increased reverse knocking noise on Chrysler Town & CountryX
If you are subject to a knocking noise when you are in reverse with your Chrysler Town & Country and this noise tends to increase as you gain speed. It is conceivable that you are going through a serious issue that needs to be resolved quickly before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your vehicle to your auto technician quickly or browse this content page about gearbox noise on Chrysler Town & Country for more information.
I perceive a noise when I go in reverse
Listening a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Chrysler Town & Country reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
