It occurs sometimes that your car makes noises in the brake calipers, you are rarely reassured by this types of noise and you automatically tend to think that you will have an accident or that the fix will cost you an substantial amount. So, what if you identify noise from the brake calipers on your Cadillac ATS? It might not be some thing major and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have made the decision to create this document and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Cadillac ATS, and give you the explanations for them in order to help you resolve the problem.
The different types of brake caliper noise on Cadillac ATS and their causes
The objective of the Cadillac ATS brake calipers is to come pinch the brake discs of your Cadillac ATS thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Finding out a noise from it must therefore be investigated immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Cadillac ATS
If you find out a grinding or scrap metal noise coming from the brake calipers of your Cadillac ATS, it is highly possible that it will be related to brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will very easily affect your discs and keep doing this scrap or grinding noise on Cadillac ATS. If after checking this point, you’re still feeling a grinding noise on your Cadillac ATS, have a look at this article to find a solution.
I encounter a frequent noise that stops when I brake from my Cadillac ATS brake calipers
If you are the victim of a regular noise in the brake calipers of your Cadillac ATS that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam with time, specifically if they are not used enough. In this case, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Cadillac ATS
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Cadillac ATS, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Cadillac ATS
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Cadillac ATS, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
