It is never pleasurable to notice a noise from your car you don’t know where from. Then what if you notice a serpentine belt noise that remains on your Kia Niro? It is extremely plausible that this is a insignificant trouble, but before being sure, it is better to carry out some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a page to support you locating and solving it. First, we will look at the serpentine belt noises on your Kia Niro and then we will look at the origins of these noises.
I encounter noises from serpentine belt Kia Niro
The best strategy to check the condition of your belts is to listen to your vehicle. Immediately after you recognise noises such as squealing or bells, you should take a closer look to check their source. The job of the serpentine belt or driving belt of your Kia Niro is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal functionality of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine components at variable speeds.
I notice squealing noises on my serpentine belt Kia Niro
This sort of squealing belt noises on Kia Niro, which will often be acute, can usually occur when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be significant and it is obviously quite simple to relate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being apparent, it should not be too complicated for you to locate a belt noise on your Kia Niro. The reason of this trouble can be linked to the damper pulley, which works as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this event is annodine. As the serpentine belt of your Kia Niro is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to check the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Kia Niro
Just like squealing, a driving belt noise on your Kia Niro that sounds like a loud grinding sound can say a lot about its condition. It is therefore necessary that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this trouble. Remember to check first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to change the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Kia Niro
Finally, if in your case you distinguish a bearing belt noise on Kia Niro, it is plausible that it is linked to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still notice a belt noises, read our article about timing belt noises on Kia Niro which could maybe help you.
