It is never enjoyable to notice a noise from your car you don’t know where from. So what if you identify a serpentine belt noise that remains on your Honda Fit? It is extremely possible that this is a unimportant trouble, but before being sure, it is better to accomplish some checks. If this belt noise comes from your serpentine or driving belt, our team has written a page to support you locating and solving it. First, we will look at the serpentine belt noises on your Honda Fit and then we will take a look at the sources of these noises.
I encounter noises from serpentine belt Honda Fit
The best strategy to check the condition of your belts is to listen to your vehicle. As soon as you notice noises such as squealing or bells, you should take a closer look to check their origin. The role of the serpentine belt or driving belt of your Honda Fit is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal overall performance of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine parts at variable speeds.
I notice squealing noises on my serpentine belt Honda Fit
This sort of squealing belt noises on Honda Fit, which will often be acute, can usually arise when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be heavy and it is often quite simple to connect it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being visible, it should not be too difficult for you to identify a belt noise on your Honda Fit. The cause of this trouble can be related to the damper pulley, which functions as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this phenomenon is annodine. As the serpentine belt of your Honda Fit is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to check the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Honda Fit
Just like squealing, a driving belt noise on your Honda Fit that sounds like a loud grinding sound can say a lot about its condition. It is therefore important that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Remember to check first the serpentine/driving belt which in most cases is the cause of this trouble, otherwise it will be necessary to replace the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Honda Fit
Finally, if in your case you recognize a bearing belt noise on Honda Fit, it is possible that it is related to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Honda Fit which could maybe help you.
