It is never pleasant to notice new noises on your vehicle. We always might worry and think about the most extreme. But experiencing wheel noise on Hyundai Veloster is very often relating to small trouble that you can easily fix. To support you in this inspection, our team decided to create this article to make your life easier and help you in this task. To do this, we will alternately see what are the distinctive noises that Hyundai Veloster wheels can create and to which failures they are linked.
The different wheel noises on Hyundai Veloster and their sources
We will therefore look at the different types of sound you may feel and their causes.
I notice grinding wheel noise on Hyundai Veloster from, cardan shaft
The first situation of grinding wheel noise on your Hyundai Veloster is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also conceivable that you may feel this sound when you drive over speed bumps. You should experience a noise close to a cracking . It is quite conceivable in this situation that one or more bellows of your gimbals are dead. In this situation, the joint must be broken and the transmission may fail. Check the condition of the joint bellows and change them if necessary or risk having your vehicle immobilized. If they have cracks, they will very fast dry out and fill with dust or stones that will rather quickly harm the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the reason of it, have a look at this article about suspension noise on Hyundai Veloster to help you find a solution.
I listen to a wheel noise Hyundai Veloster when coasting due to a bearing
One of the other possible origins of signs on the front wheel of your Hyundai Veloster when coasting, may be that one of your bearing is tired, it will tend to produce a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case change it or them in the near future. If, on the other hand, this noise only manifests itself with an engaged speed, have a look at this article about loud noises on Hyundai Veloster, you will most likely find an answer to your problem.
I acknowledge a wheel noise Hyundai Veloster due to brakes
If you knowledge noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will create a loud metallic sound that you will surely feel. To verify this, put your vehicle on axle stands, and verify the condition of your discs and pads by taking off the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Hyundai Veloster, but the brakes are not the cause, browse this article for more information on this problem.
I perceive a wheel noise Hyundai Veloster due to faulty wheel alingment
If you feel a sound that may look like a vibration and will increase as you increase speed, it is conceivable that your wheel alingment or balancing is the reason of it. Wheel alingment of a vehicle is an important step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Hyundai Veloster. Verify that your seals are still in place, otherwise go to your mechanic.
I hear a wheel noise Hyundai Veloster connected to wishbone
Finally, you may experience a noise on your Hyundai Veloster at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this problem comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone when you accelerate when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.
