It is never relaxing to experience new sounds on your car. We usually will be anxious and think about the most extreme. But experiencing wheel noise on Volvo S90 is very often linked to small issue that you can easily eliminate. To support you in this inspection, our team decided to compose this article to make your life easier and help you in this challenge. To do this, we will alternately see what are the different noises that Volvo S90 wheels can create and to which failures they are linked.
The different wheel noises on Volvo S90 and their sources
We will therefore look at the different types of sound you may experience and their sources.
I perceive grinding wheel noise on Volvo S90 from, cardan shaft
The first situation of grinding wheel noise on your Volvo S90 is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also conceivable that you may experience this sound when you pass over speed bumps. You should experience a noise close to a cracking . It is quite conceivable in this situation that one or more bellows of your gimbals are dead. In this case, the joint must be weakened and the transmission may fail. Check the condition of the joint bellows and swap them if needed or risk having your car immobilized. If they have cracks, they will promptly dry out and fill with dust or stones that will rather quickly harm the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the cause, browse this guide about suspension noise on Volvo S90 to help you find a solution.
I acknowledge a wheel noise Volvo S90 when coasting linked to a bearing
One of the other possible origins of signs on the front wheel of your Volvo S90 when coasting, may be that one of your bearing is good to be replaced, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case swap it or them before long. If, on the other hand, this noise only manifests itself with an engaged speed, browse this guide about loud noises on Volvo S90, you will most likely find a solution to your problem.
I listen to a wheel noise Volvo S90 linked to brakes
If you experience noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will make a loud metallic sound that you will undoubtedly notice. To verify this, put your car on axle stands, and verify the condition of your discs and pads by getting rid of the wheel. If they are involved, swap them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your Volvo S90, but the brakes are not the cause, read this guide for more details on this problem.
I acknowledge a wheel noise Volvo S90 linked to faulty wheel alingment
If you experience a sound that may be like a vibration and will increase as you increase speed, it is conceivable that your wheel alingment or balancing is the origin of it. Wheel alingment of a car is a major step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Volvo S90. Check that your seals are still in place, otherwise go to your mechanic.
I notice a wheel noise Volvo S90 caused by wishbone
Finally, you may feel a noise on your Volvo S90 at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the trigger of this problem comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone when you accelerate when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your repair shop.
