It happens occasionally that your car makes noises in the brake calipers, you are pretty much never reassured by this kind of noise and you immediately tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you discern noise from the brake calipers on your Chevrolet Trax? It might not be some thing severe and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to write this content and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Chevrolet Trax, and give you the reasons for them in order to help you solve the trouble.
The different types of brake caliper noise on Chevrolet Trax and their causes
The objective of the Chevrolet Trax brake calipers is to come pinch the brake discs of your Chevrolet Trax thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Hearing a sound from it must therefore be analyzed right away and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Chevrolet Trax
If you notice a grinding or scrap metal noise coming from the brake calipers of your Chevrolet Trax, it is highly possible that it will be caused by brake pads at the end of their existence, actually, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Chevrolet Trax. If after examining this point, you’re still having a grinding noise on your Chevrolet Trax, have a look at this article to find a solution.
I feel a continuous noise that stops when I brake from my Chevrolet Trax brake calipers
If you are the victim of a continual noise in the brake calipers of your Chevrolet Trax that only stops when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam over time, specifically if they are not employed enough. In this case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Chevrolet Trax
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Chevrolet Trax, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be changed at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your technician.
When I brake, I feel a squealing in my brake calipers of my Chevrolet Trax
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Chevrolet Trax, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
