It is never pleasurable to find out new sounds on your car. We always might worry and think about the most extreme. But hearing wheel noise on Chevrolet Volt is very often linked to small problems that you can easily fix. To help you in this inspection, our team decided to write this content to make your life easier and support you in this task. To do this, we will alternately see what are the different noises that Chevrolet Volt wheels can provoke and to which failures they are associated.
The diverse wheel noises on Chevrolet Volt and their origins
We will therefore look at the different types of noise you may feel and their causes.
I hear grinding wheel noise on Chevrolet Volt from, cardan shaft
The first situation of grinding wheel noise on your Chevrolet Volt is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also possible that you may feel this noise when you drive over speed bumps. You should hear a noise close to a cracking . It is quite possible in this circumstance that one or more bellows of your gimbals are out of date. In this case, the joint must be injured and the transmission may fail. Check the condition of the joint bellows and swap them if needed or risk having your car immobilized. If they have holes, they will quickly dry out and fill with dust or stones that will quickly damage the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the reason of it, read this guide about suspension noise on Chevrolet Volt to support you find a solution.
I find out a wheel noise Chevrolet Volt when coasting connected to a bearing
One of the other potential triggers of signs on the front wheel of your Chevrolet Volt when coasting, may be that one of your bearing is good to be replaced, it will tend to produce a thumping noise that intensifies when it is stressed (turns faster and faster). So you should verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them as soon as possible. If, on the other hand, this noise only shows up itself with an engaged speed, read this guide about loud noises on Chevrolet Volt, you will most likely find an answer to your trouble.
I listen to a wheel noise Chevrolet Volt connected to brakes
If you perceive noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will make a loud metallic noise that you will inevitably feel. To verify this, put your car on axle stands, and check the condition of your discs and pads by getting rid of the wheel. If they are involved, swap them rather quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Chevrolet Volt, but the brakes are not the cause, read this guide for more details on this trouble.
I experience a wheel noise Chevrolet Volt connected to faulty wheel alingment
If you feel a noise that may look like a vibration and will increase as you increase speed, it is possible that your wheel alingment or balancing is the reason of it. Wheel alingment of a car is a fundamental step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Chevrolet Volt. Check that your seals are still set up, otherwise go to your garage.
I experience a wheel noise Chevrolet Volt linked to wishbone
Finally, you may experience a noise on your Chevrolet Volt at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this trouble comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your mechanic.
