It is never pleasant to perceive new sounds on your automobile. We usually might get worried and think about the worst. But hearing wheel noise on Chevrolet Trax is very often linked to small concerns that you can easily resolve. To assist you in this examination, our team decided to produce this content to make your life easier and help you in this task. To do this, we will alternately see what are the distinctive noises that Chevrolet Trax wheels can provoke and to which malfunctions they are linked.
The diverse wheel noises on Chevrolet Trax and their origins
We will therefore look at the different types of sound you may feel and their causes.
I hear grinding wheel noise on Chevrolet Trax from, cardan shaft
The first possibility of grinding wheel noise on your Chevrolet Trax is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also possible that you may feel this sound when you drive over speed bumps. You should encounter a noise close to a cracking . It is quite possible in this circumstance that one or more bellows of your gimbals are dead. In this situation, the joint must be broken and the transmission may fail. Check the condition of the joint bellows and swap them if required or risk having your automobile immobilized. If they have cracks, they will in the near future dry out and fill with dust or stones that will fairly quickly damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not responsible, read this article about suspension noise on Chevrolet Trax to help you find a solution.
I get a wheel noise Chevrolet Trax when coasting attributable to a bearing
One of the other potential origins of symptoms on the front wheel of your Chevrolet Trax when coasting, may be that one of your bearing is tired, it will tend to produce a thumping sound that intensifies when it is stressed (turns faster and faster). So make sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case swap it or them in short order. If, on the other hand, this noise only manifests itself with an engaged speed, read this article about loud noises on Chevrolet Trax, you will most likely find a resolution to your problem.
I experience a wheel noise Chevrolet Trax attributable to brakes
If you experience noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will generate a loud metallic sound that you will obviously feel. To check this, put your automobile on axle stands, and examine the condition of your discs and pads by removing the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Chevrolet Trax, but the brakes are not the cause, read this article for more details on this problem.
I notice a wheel noise Chevrolet Trax connected to faulty wheel alingment
If you feel a sound that may look like a vibration and will increase as you increase speed, it is possible that your wheel alingment or balancing is involved. Wheel alingment of a automobile is an important step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Chevrolet Trax. Examine that your seals are still set up, otherwise go to your garage.
I find out a wheel noise Chevrolet Trax due to wishbone
Finally, you may notice a noise on your Chevrolet Trax at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this problem comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.
