It is never enjoyable to perceive new sounds on your vehicle. We always tend to get worried and think about the worst. But finding out wheel noise on Mitsubishi Lancer is very often relating to small issue that you can easily resolve. To support you in this examination, our team decided to create this paper to make your life easier and support you in this process. To do this, we will alternately see what are the distinctive noises that Mitsubishi Lancer wheels can create and to which malfunctions they are associated.
The different wheel noises on Mitsubishi Lancer and their sources
We will therefore concentrate on the different types of sound you may experience and their triggers.
I hear grinding wheel noise on Mitsubishi Lancer from, cardan shaft
The first situation of grinding wheel noise on your Mitsubishi Lancer is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also conceivable that you may experience this sound when you drive over speed bumps. You should hear a noise close to a cracking . It is quite conceivable in this situation that one or more bellows of your gimbals are out of date. In this situation, the joint must be injured and the transmission may fail. Check the condition of the joint bellows and change them if necessary or risk having your vehicle immobilized. If they have holes, they will in the near future dry out and fill with dust or stones that will quickly damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the cause, read this article about suspension noise on Mitsubishi Lancer to support you find a solution.
I notice a wheel noise Mitsubishi Lancer when coasting due to a bearing
One of the other possible origins of symptoms on the front wheel of your Mitsubishi Lancer when coasting, may be that one of your bearing is good to be replaced, it will tend to make a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well coming from here, if this is the case change it or them as soon as possible. If, on the other hand, this noise only shows up itself with an engaged speed, read this article about loud noises on Mitsubishi Lancer, you will most likely find a resolution to your issue.
I find out a wheel noise Mitsubishi Lancer due to brakes
If you knowledge noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will make a loud metallic sound that you will surely notice. To verify this, put your vehicle on axle stands, and verify the condition of your discs and pads by extracting the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your Mitsubishi Lancer, but the brakes are not the cause, browse this article for more information on this issue.
I listen to a wheel noise Mitsubishi Lancer linked to faulty wheel alingment
If you experience a sound that may resemble a vibration and will increase as you increase speed, it is conceivable that your wheel alingment or balancing is the reason of it. Wheel alingment of a vehicle is an essential step that is generally done after each tire change. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Mitsubishi Lancer. Examine that your seals are still in position, otherwise go to your garage.
I notice a wheel noise Mitsubishi Lancer linked to wishbone
Finally, you may experience a noise on your Mitsubishi Lancer at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the trigger of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto technician.
