It occurs occasionally that your car makes noises in the brake calipers, you are almost never reassured by this types of noise and you instantly tend to think that you will have an accident or that the fix will cost you an substantial amount of money. So, what if you detect noise from the brake calipers on your Jeep Cherokee? It might not be some thing severe and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to write this article and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Jeep Cherokee, and give you the explanations for them in order to help you fix the trouble.
The different types of brake caliper noise on Jeep Cherokee and their causes
The objective of the Jeep Cherokee brake calipers is to come pinch the brake discs of your Jeep Cherokee thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Experiencing a noise from it must therefore be examined immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Jeep Cherokee
If you notice a grinding or scrap metal noise coming from the brake calipers of your Jeep Cherokee, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will very easily affect your discs and keep doing this scrap or grinding noise on Jeep Cherokee. If after verifying this point, you’re still feeling a grinding noise on your Jeep Cherokee, have a look at this article to find a solution.
I feel a uninterrupted noise that stops when I brake from my Jeep Cherokee brake calipers
If you are the victim of a regular noise in the brake calipers of your Jeep Cherokee that only stops when you press your brake system, it is quite possible that caliper wear is the reason. In fact, they can jam after some time, specifically if they are not used enough. In such a case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Jeep Cherokee
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Jeep Cherokee, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I feel a squealing in my brake calipers of my Jeep Cherokee
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Jeep Cherokee, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
