It appears in some cases that your automobile makes noises in the brake calipers, you are pretty much never reassured by this sort of noise and you automatically tend to think that you will have an incident or that the fix will cost you an astronomical amount of money. So, what if you discern noise from the brake calipers on your Dodge Nitro? It might not be some thing severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have chosen to write this article and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Dodge Nitro, and give you the explanations for them in order to help you solve the issue.
The different types of brake caliper noise on Dodge Nitro and their causes
The function of the Dodge Nitro brake calipers is to come pinch the brake discs of your Dodge Nitro thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Experiencing a noise from it must therefore be looked into promptly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Dodge Nitro
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Dodge Nitro, it is highly conceivable that it will be connected to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Dodge Nitro. If after verifying this point, you’re still having a grinding noise on your Dodge Nitro, have a look at this article to find a solution.
I feel a frequent noise that stops when I brake from my Dodge Nitro brake calipers
If you are the victim of a continual noise in the brake calipers of your Dodge Nitro that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam as time passes, especially if they are not used enough. When this happens, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Dodge Nitro
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Dodge Nitro, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your technician.
When I brake, I feel a squealing in my brake calipers of my Dodge Nitro
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Dodge Nitro, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
