It happens in some cases that your car makes noises in the brake calipers, you are rarely reassured by this sort of noise and you instantly tend to think that you will have an incident or that the fix will cost you an substantial amount. So, what if you identify noise from the brake calipers on your Audi Q5? It most likely is not some thing severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have made the decision to write this content and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Audi Q5, and give you the reasons for them in order to help you resolve the issue.
The different types of brake caliper noise on Audi Q5 and their causes
The objective of the Audi Q5 brake calipers is to come pinch the brake discs of your Audi Q5 thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Finding out a noise from it must therefore be analyzed immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Audi Q5
If you notice a grinding or scrap metal noise coming from the brake calipers of your Audi Q5, it is highly possible that it will be caused by brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Audi Q5. If after checking out this point, you’re still having a grinding noise on your Audi Q5, have a look at this article to find a solution.
I experience a constant noise that stops when I brake from my Audi Q5 brake calipers
If you are the victim of a continual noise in the brake calipers of your Audi Q5 that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam over time, especially if they are not employed enough. In this case, they will tend to remain in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Audi Q5
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Audi Q5, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Audi Q5
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Audi Q5, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
