It happens in some cases that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you immediately tend to think that you will have an accident or that the repair will cost you an substantial amount of money. So, what if you detect noise from the brake calipers on your Ford Ranger? It is probably not anything serious and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have decided to create this document and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ford Ranger, and give you the explanations for them in order to help you fix the problem.
The different types of brake caliper noise on Ford Ranger and their causes
The function of the Ford Ranger brake calipers is to come pinch the brake discs of your Ford Ranger thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a noise from it must therefore be examined promptly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Ford Ranger
If you hear a grinding or scrap metal noise coming from the brake calipers of your Ford Ranger, it is highly imaginable that it will be caused by brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Ford Ranger. If after examining this point, you’re still enduring a grinding noise on your Ford Ranger, have a look at this article to find a solution.
I experience a continuing noise that stops when I brake from my Ford Ranger brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Ford Ranger that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam after some time, specifically if they are not used enough. In such a case, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford Ranger
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Ford Ranger, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Ford Ranger
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Ford Ranger, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
