It happens in some cases that your automobile makes noises in the brake calipers, you are almost never reassured by this sort of noise and you automatically tend to think that you will have an accident or that the fix will cost you an substantial amount. So, what if you discover noise from the brake calipers on your Chevrolet HHR? It might not be some thing severe and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have chosen to create this document and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Chevrolet HHR, and give you the causes for them in order to help you fix the issue.
The different types of brake caliper noise on Chevrolet HHR and their causes
The objective of the Chevrolet HHR brake calipers is to come pinch the brake discs of your Chevrolet HHR thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Finding out a noise from it must therefore be examined immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Chevrolet HHR
If you find out a grinding or scrap metal noise coming from the brake calipers of your Chevrolet HHR, it is highly conceivable that it will be connected to brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Chevrolet HHR. If after examining this point, you’re still going through a grinding noise on your Chevrolet HHR, have a look at this article to find a solution.
I experience a constant noise that stops when I brake from my Chevrolet HHR brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Chevrolet HHR that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam after some time, especially if they are not employed enough. In this case, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Chevrolet HHR
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Chevrolet HHR, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Chevrolet HHR
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Chevrolet HHR, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
