It happens in some cases that your automobile makes noises in the brake calipers, you are pretty much never reassured by this kind of noise and you instantly tend to think that you will have an accident or that the fix will cost you an astronomical amount of money. So, what if you discover noise from the brake calipers on your Jeep Wrangler? It most likely is not some thing major and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to write this article and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Jeep Wrangler, and give you the causes for them in order to help you fix the problem.
The different types of brake caliper noise on Jeep Wrangler and their causes
The objective of the Jeep Wrangler brake calipers is to come pinch the brake discs of your Jeep Wrangler thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a sound from it must therefore be examined right away and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Jeep Wrangler
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Jeep Wrangler, it is highly imaginable that it will be related to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will very easily affect your discs and keep doing this scrap or grinding noise on Jeep Wrangler. If after checking this point, you’re still feeling a grinding noise on your Jeep Wrangler, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake from my Jeep Wrangler brake calipers
If you are the victim of a continuous noise in the brake calipers of your Jeep Wrangler that only stops when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam over time, specifically if they are not used enough. In this case, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Jeep Wrangler
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Jeep Wrangler, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I encounter a squealing in my brake calipers of my Jeep Wrangler
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Jeep Wrangler, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
