Repeatedly finding out noises from your car is never pleasurable, so finding out wiper sounds on your Infiniti Q60 can be stressing. This manifestation may be an indication of a small issue as well as a warning of a small repair to come. No matter the reason, it is imperative to check the source and take the necessary actions to fix the issue, it is with this in mind that we decided to create this content to support you see more clearly. We will first look into the plausible reasons and solutions for dealing with noise from your wipers on your Infiniti Q60. Then, in a second step, we will give you some suggestions to prevent this type of noise from occurring again.
Wiper blades that generates a squeaking or rubbing noise on Infiniti Q60
A wiper noise on your Infiniti Q60, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your focus while you are driving. It is necessary to stop such a sound. Also, a wiper blade noise is usually the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Infiniti Q60
- Check the wear of your wiper blades. This is the most common origin of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about swapping them in both circumstances.
- Dirty windshield, check the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may acknowledge a wiper noise on your Infiniti Q60, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very effective.
- Check that your wiper blades are well positioned. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Check the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Infiniti Q60 comes out.
Some universal recommendations to limit wiper blades noise on your Infiniti Q60
To finish , we will give you some suggestions and warnings to help you expand the life of your wipers and avoid unwanted noise they may trigger during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this function, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will build may prevent you from seeing the road properly. Indeed, this oily film will make a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise produced by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or damage to your windshield wipers.