Repeatedly finding out noises from your automobile is never pleasurable, so finding out wiper sounds on your Audi Q7 can be stressing. This warning sign may be a sign of a moderate trouble as well as a warning of a moderate fix to come. In any case, it is imperative to find the origin and take the necessary measures to solve the trouble, it is with this in mind that we wanted to compose this content to help you see more clearly. We will first check out the possible causes and solutions for dealing with noise from your wipers on your Audi Q7. Then, in a second step, we will give you some recommendations to prevent this type of noise from happening again.
Wiper blades that causes a squeaking or rubbing noise on Audi Q7
A wiper noise on your Audi Q7, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your focus while you are driving. It is important to stop such a sound. In addition, a wiper blade noise is mostly the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Audi Q7
- Verify the wear of your wiper blades. This is the most common cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about changing them in both circumstances.
- Dirty windshield, examine the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may notice a wiper noise on your Audi Q7, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very practical.
- Verify that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can examine these two points.
- Verify the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Audi Q7 comes out.
Some general suggestions to limit wiper blades noise on your Audi Q7
Finally, we will give you some suggestions and warnings to help you increase the life of your wipers and prevent unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, furthermore if you wanted to use it for this goal, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. Indeed, this oily film will make a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main cause for the noise generated by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or damage to your windshield wipers.
