Constantly finding out noises from your automobile is never pleasurable, so finding out wiper sounds on your Infiniti Q50 can be troubling. This symptom may be a symptom of a minor problem as well as a warning of a minor fix to come. No matter the reason, it is imperative to find the source and take the necessary measures to solve the problem, it is with this in mind that we decided to prepare this content to support you see more clearly. We will first look at the conceivable reasons and solutions for dealing with noise from your wipers on your Infiniti Q50. Then, in a second step, we will give you some recommendations to prevent this type of noise from happening again.
Wiper blades that causes a squeaking or rubbing noise on Infiniti Q50
A wiper noise on your Infiniti Q50, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your focus while you are driving. It is essential to eliminate such a sound. In addition, a wiper blade noise is generally the sign of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Infiniti Q50
- Verify the wear of your wiper blades. This is the most general cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about replacing them in both situations.
- Dirty windshield, check the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may acknowledge a wiper noise on your Infiniti Q50, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Verify that your wiper blades are well situated. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Verify the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Infiniti Q50 shows up.
Some general suggestions to limit wiper blades noise on your Infiniti Q50
Finally, we will give you some advice and warnings to help you extend the life of your wipers and avoid unwanted noise they may provoke during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, additionally if you wanted to use it for this function, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will build a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise produced by your windshield wipers, we recommend you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
