Constantly discovering noises from your vehicle is never pleasurable, so discovering wiper sounds on your GMC Savana can be disturbing. This indicator may be an indicator of a insignificant issue as well as a warning of a insignificant fix to come. No matter the reason, it is imperative to verify the source and take the necessary actions to correct the issue, it is with this in mind that we wanted to produce this content page to support you see more clearly. We will first look at the conceivable causes and solutions for dealing with noise from your wipers on your GMC Savana. Then, in a second step, we will give you some advice to prevent this type of noise from happening again.
Wiper blades that produces a squeaking or rubbing noise on GMC Savana
A wiper noise on your GMC Savana, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your focus while you are driving. It is necessary to fix such a noise. Moreover, a wiper blade noise is usually the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your GMC Savana
- Examine the wear of your wiper blades. This is the most regular cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on replacing them in both situations.
- Dirty windshield, examine the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may hear a wiper noise on your GMC Savana, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very practical.
- Examine that your wiper blades are well installed. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can examine these two points.
- Examine the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your GMC Savana happens.
Some universal recommendations to limit wiper blades noise on your GMC Savana
To finish , we will give you some advice and warnings to help you expand the life of your wipers and avoid unwanted noise they may cause during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, also if you wanted to use it for this goal, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will create may prevent you from seeing the road properly. In fact, this oily film will build a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise created by your windshield wipers, we advise you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or deteriorate to your windshield wipers.
