Constantly hearing noises from your automobile is never enjoyable, so hearing wiper sounds on your Mazda 6 can be troubling. This indicator may be an indication of a insignificant problem as well as a warning of a insignificant repair to come. No matter the reason, it is imperative to examine the origin and take the necessary measures to solve the problem, it is with this in mind that we desired to write this content page to help you see more clearly. We will first take a look at the conceivable causes and solutions for dealing with noise from your wipers on your Mazda 6. Then, in a second step, we will give you some advice to prevent this type of noise from occurring again.
Wiper blades that makes a squeaking or rubbing noise on Mazda 6
A wiper noise on your Mazda 6, whether it is a squeak noise or rather a rubbing noise on your windshield, is not enjoyable and can distract your concentration while you are driving. It is important to stop such a sound. Moreover, a wiper blade noise is mostly the indication of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Mazda 6
- Verify the wear of your wiper blades. This is the most common trigger of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider replacing them in both cases.
- Dirty windshield, examine the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen a wiper noise on your Mazda 6, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very effective.
- Verify that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can examine these two points.
- Verify the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Mazda 6 happens.
Some basic recommendations to limit wiper blades noise on your Mazda 6
To finish , we will give you some suggestions and warnings to help you extend the life of your wipers and avoid unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, also if you wanted to use it for this goal, you would have to rinse abundantly because it makes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. Indeed, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise generated by your windshield wipers, we recommend you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or damage to your windshield wipers.
