It happens sometimes that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you automatically tend to think that you will have an accident or that the fix will cost you an substantial sum. So, what if you discover noise from the brake calipers on your Chevrolet Impala? It might not be anything severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to write this document and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Chevrolet Impala, and give you the causes for them in order to help you solve the trouble.
The different types of brake caliper noise on Chevrolet Impala and their causes
The function of the Chevrolet Impala brake calipers is to come pinch the brake discs of your Chevrolet Impala thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Experiencing a sound from it must therefore be analyzed immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Chevrolet Impala
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Chevrolet Impala, it is highly conceivable that it will be connected to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Chevrolet Impala. If after checking this point, you’re still feeling a grinding noise on your Chevrolet Impala, have a look at this article to find a solution.
I experience a continuing noise that stops when I brake from my Chevrolet Impala brake calipers
If you are the victim of a constant noise in the brake calipers of your Chevrolet Impala that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam after some time, especially if they are not used enough. In this case, they will tend to keep on being in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Chevrolet Impala
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Chevrolet Impala, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Chevrolet Impala
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Chevrolet Impala, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
