Frequently finding out noises from your automobile is never pleasant, so finding out wiper sounds on your Dodge Caliber can be distressing. This warning sign may be a sign of a moderate trouble as well as a warning of a moderate service to come. In any case, it is imperative to examine the origin and take the necessary measures to fix the trouble, it is with this in mind that we decided to write this article content to help you see more clearly. We will first look into the plausible reasons and solutions for dealing with noise from your wipers on your Dodge Caliber. Then, in a second step, we will give you some advice to prevent this type of noise from occurring again.
Wiper blades that generates a squeaking or rubbing noise on Dodge Caliber
A wiper noise on your Dodge Caliber, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your focus while you are driving. It is imperative to eliminate such a sound. In addition, a wiper blade noise is mostly the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Dodge Caliber
- Check the wear of your wiper blades. This is the most general origin of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on replacing them in both cases.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may perceive a wiper noise on your Dodge Caliber, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very effective.
- Check that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Check the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Dodge Caliber arises.
Some basic suggestions to limit wiper blades noise on your Dodge Caliber
Finally, we will give you some suggestions and warnings to help you expand the life of your wipers and avoid unwanted noise they may reason during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this task, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will generate may prevent you from seeing the road properly. Indeed, this oily film will develop a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise produced by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or damage to your windshield wipers.
