Frequently experiencing noises from your automobile is never pleasant, so experiencing wiper sounds on your Honda Fit can be disturbing. This warning sign may be a symptom of a slight trouble as well as a warning of a slight repair to come. Whatever the case, it is useful to locate the origin and take the necessary actions to correct the trouble, it is with this in mind that we wanted to create this article to support you see more clearly. We will first look at the possible causes and solutions for dealing with noise from your wipers on your Honda Fit. Then, in a second step, we will give you some suggestions to prevent this type of noise from happening again.
Wiper blades that produces a squeaking or rubbing noise on Honda Fit
A wiper noise on your Honda Fit, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is essential to fix such a sound. Also, a wiper blade noise is in most cases the indicator of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Honda Fit
- Check the wear of your wiper blades. This is the most common origin of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about changing them in both cases.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may perceive a wiper noise on your Honda Fit, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very effective.
- Check that your wiper blades are well situated. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Check the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Honda Fit shows up.
Some general recommendations to limit wiper blades noise on your Honda Fit
To finish , we will give you some suggestions and warnings to help you extend the life of your wipers and prevent unwanted noise they may reason during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, also if you wanted to use it for this reason, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise produced by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
