Repeatedly listening noises from your car is never enjoyable, so listening wiper sounds on your Jeep Wrangler can be disturbing. This manifestation may be an indication of a insignificant problem as well as a warning of a insignificant fix to come. In any case, it is useful to examine the source and take the necessary measures to fix the problem, it is with this in mind that we desired to write this content page to help you see more clearly. We will first check out the conceivable reasons and solutions for dealing with noise from your wipers on your Jeep Wrangler. Then, in a second step, we will give you some advice to prevent this type of noise from happening again.
Wiper blades that causes a squeaking or rubbing noise on Jeep Wrangler
A wiper noise on your Jeep Wrangler, whether it is a squeak noise or rather a rubbing noise on your windshield, is not enjoyable and can distract your concentration while you are driving. It is necessary to fix such a noise. Moreover, a wiper blade noise is mostly the indication of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Causes and solutions for wiper noise on your Jeep Wrangler
- Check the wear of your wiper blades. This is the most regular reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about replacing them in both situations.
- Dirty windshield, verify the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen a wiper noise on your Jeep Wrangler, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very practical.
- Check that your wiper blades are well positioned. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Check the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Jeep Wrangler appears.
Some universal tips to limit wiper blades noise on your Jeep Wrangler
Finally, we will give you some advice and warnings to help you extend the life of your wipers and avoid unwanted noise they may trigger during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this goal, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise generated by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or damage to your windshield wipers.
