Hearing noises from your car is never pleasurable. Specifically constant noises such as rubbing noises on Fiat 500 that will disturb you and prevent you from cruising in the regular quiet environment that your car gives you. If you notice rubbing noise on Fiat 500, you are in the right place, our editorial staff has decided to create this article content to help you find the origin and stop it. This is why, first of all, we will look at the rubbing noises that can come out when you drive with your Fiat 500, and secondly, the rubbing noises that originate from your engine block.
I listen to a rubbing noise on Fiat 500 when I drive
Noise of rubbing from wheels
First, we will look into rubbing noises that can be due to wheel, be aware that in this content page we will only analyze the most traditional triggers of rubbing noises on Fiat 500 in association with your wheels, if you desire a full report on wheel noise on Fiat 500, it’s here.
- Rubbing noise coming from your bearing
- Brake noise
One of the other probable triggers of rubbing noise symptoms on your Fiat 500, may be that one of your bearing is tired, it will tend to make a loud noise that raises when stressed (turns faster and faster). So please remember to verify by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well based here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this guide on Ancre_loud_noise, you will most likely find a remedy to your problem.
If you hear a rubbing noise on Fiat 500 and you have the feeling that it comes from your wheels, it is highly plausible that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To verify this, put your car on safety stand, and verify the state of your discs and pads by getting rid of the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want infos about it, go through this guide for more info about brake noises on Fiat 500.
Noise of rubbing from under the car
Finally, a rubbing noise on your Fiat 500 from the lower part of the chassis may be linked to a poor attachment of your exhaust to your automobile. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In such a case, you must verify, when cold, that the exhaust holds well, to achieve this try to make it move in different angles and monitor how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In this case it will have to be changed. If your exhaust is the trigger of this exhaust noise on Fiat 500, but the silent blocks are not the reason, read this guide to find the trigger.
I listen to a rubbing noise on Fiat 500 coming from the engine
If it is close to an engine noise rubbing on Fiat 500, you may have one of the bearings of your engine accessory parts that is damaged or, one of your belts are displaced or worn and trigger this friction.So check the state and try to find the exact origin of this noise by positioning someone at the engine at idle, and if this noise is more likely to occur in rpm, accelerate and position someone at the engine block to identify the area of source of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also keep in mind to verify the state of your belts, and change them if required because it is the health of your car that is at stake. If you experience belt noises on Fiat 500, we suggest that you consult this article content for more details on this subject.
