Do you notice a metallic noise on your Toyota Sequoia once you drive? We can understand that this is not pleasurable and that you are wandering. Experiencing such a noise is not always a good indicator, but it may also be nothing severe. To help you remedy this issue, our team has decided to prepare this content page to assist you in this research. In order to conduct this research as efficiently as possible, we will first have a look at the conceivable sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Toyota Sequoia coming from the front end of the vehicle
I experience a metal rattling noise coming from wheels
- Metallic noise coming from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable causes of metal noise symptoms on your Toyota Sequoia, may be that one of your bearing is tired, it will frequently make a loud noise that goes up when stressed (turns faster and faster). So please remember to check by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this report on loud noise on Toyota Sequoia, you will most likely find a remedy to your issue.
If you hear a metalic noise on Toyota Sequoia and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the condition of your discs and pads by taking away the wheel. If they are involved, change them promptly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want informations about it, browse this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you experience a metallic noise on your Toyota Sequoia, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To check this, put yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we recommend that you read this content page for a complete guide about steering noises on Toyota Sequoia.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Toyota Sequoia. Once screwed up, they will no longer fulfill their function as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, think about to check their status and change them if necessary. Feel free to consult this content page which is a complete file about strut mounts noises on Toyota Sequoia, how to check their condition and swap them.
Finally, the last basic cause of metallic noise on Toyota Sequoia. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend that you read this detailed guide on the origins of steering noises on Toyota Sequoia.
Metallic noise Toyota Sequoia coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the cause of this noise. To be certain, go under the vehicle, cold, and knock each of the previously stated elements with a hammer to determine the origin of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider changing it, as well as the silencer. In this case, to stop the metallic noise on your Toyota Sequoia, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is conceivable that with wear they are at the origin of your metallic noises on your Toyota Sequoia. Go a little further up in the article content where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
